Generator Features
GM 5.7L Engine - The 8 cylinder, overhead valve GM 5.7L engine meets EPA/CARB emission regulations. The 5.7L is the premier industrial workhorse, providing the power needed to get the job done without sacrificing fuel efficiency or durability.
Stamford Generator End - Industrial grade generator ends predominantly used for standby applications. These alternators are very versatile for more demanding and challenging applications.
Premium Circuit Breakers - Dependable circuit breaker protection.
Battery Charger - Factory installed 3 stage, 2 Amp battery charger.
Block Heater - In-Line Hotstart, 120V, block heater with thermostat.
DSE 7310 Controller - The DSE7310 MKII is a powerful, new generation auto start genset control module with a highly sophisticated level of new features and functions, presented in the usual DSE user-friendly format.
Galvanealed Steel Weather Enclosure -Winco's Weather enclosures provide sound reduction while our powder coat paint provides a durable, long lasting finish.
100% Load Tested - You won't find statistical sampling here. Winco load tests every generator before it leaves the factory.
PSS60 Generator Specifications
Single Phase
4 Lead
3 Phase
12 Lead
Voltage Regulation
+/-1%
Voltage Control
AS 400
Total Harmonic Distortion
<5%
Temperature Rise
125°F/40°C
Type
4 Pole Rotating Field
Brushed
No
Generator Speed
1800 RPM
Rotor
2/3 Pitch
Windings
100% Copper
Stator Winding
Double Layer Concentric
Efficiency Peak
91%
Coupling
Flexible Disc
Bearings
(1) Maintenance Free
Telephone Interference
<2%
Insulation
Class H
Generator Warranty
1 Yr/1000 Hrs
Shipping Dimensions
109" x 40.5" x 60"
Ship Weight
3,390 LBS
Freight Class
70
PSS60 Engine Specifications
Engine Manufacturer
GM
Engine Model
5.7L Industrial
Engine Speed
1800
Engine Displacement
5.7L
Engine Cylinders
8
Lubrication
Forced w/Spin On Filter
Cooling
Liquid
Bore x Stroke
4 x 3.5"
Ignition
Electric
Governor
Electronic
Regulation
+/- 1 Hz Steady State
Exhaust
Critical Grade
Exhaust Outlet Size
3" at Muffler
Recommended Oil
SAE 10W-30
Oil Capacity
5.5 QTS
Low Oil Protection
Standard
High Coolant Temp Protection
Standard
dBA @ 7 meters (Full Load)
75
Motor Starting (Code G)
20 HP
CARB Approved
Yes
EPA Approved
Yes
CSA Approved
Yes
Fuel Consumption NG 100% Load
799 FT³/HR - 798,455 BTU/HR
Fuel Consumption LP 100% Load
9.29 GAL/HR - 850,964 BTU/HR
Inlet Pressure
4-6 oz / 7-11" water column
Inlet Fuel Size
1 1/4"
Engine Warranty
3 yrs/3500 hrs
PSS60 Battery Specifications
DC System Voltage
12V
DC Alternator
Engine Mounted
Battery Rack/Cables
Included
Battery Charger
5 Amp Included
Required Battery
Group 24 650 CC
Additional Information
Weight
2390 lbs
Dimensions
109 × 40.5 × 60 in
Winco PSS60 – Standby Generator
- Product Code: PSS60
Generator Features
GM 5.7L Engine - The 8 cylinder, overhead valve GM 5.7L engine meets EPA/CARB emission regulations. The 5.7L is the premier industrial workhorse, providing the power needed to get the job done without sacrificing fuel efficiency or durability.
Stamford Generator End - Industrial grade generator ends predominantly used for standby applications. These alternators are very versatile for more demanding and challenging applications.
Premium Circuit Breakers - Dependable circuit breaker protection.
Battery Charger - Factory installed 3 stage, 2 Amp battery charger.
Block Heater - In-Line Hotstart, 120V, block heater with thermostat.
DSE 7310 Controller - The DSE7310 MKII is a powerful, new generation auto start genset control module with a highly sophisticated level of new features and functions, presented in the usual DSE user-friendly format.
Galvanealed Steel Weather Enclosure -Winco's Weather enclosures provide sound reduction while our powder coat paint provides a durable, long lasting finish.
100% Load Tested - You won't find statistical sampling here. Winco load tests every generator before it leaves the factory.
PSS60 Generator Specifications
Single Phase
4 Lead
3 Phase
12 Lead
Voltage Regulation
+/-1%
Voltage Control
AS 400
Total Harmonic Distortion
<5%
Temperature Rise
125°F/40°C
Type
4 Pole Rotating Field
Brushed
No
Generator Speed
1800 RPM
Rotor
2/3 Pitch
Windings
100% Copper
Stator Winding
Double Layer Concentric
Efficiency Peak
91%
Coupling
Flexible Disc
Bearings
(1) Maintenance Free
Telephone Interference
<2%
Insulation
Class H
Generator Warranty
1 Yr/1000 Hrs
Shipping Dimensions
109" x 40.5" x 60"
Ship Weight
3,390 LBS
Freight Class
70
PSS60 Engine Specifications
Engine Manufacturer
GM
Engine Model
5.7L Industrial
Engine Speed
1800
Engine Displacement
5.7L
Engine Cylinders
8
Lubrication
Forced w/Spin On Filter
Cooling
Liquid
Bore x Stroke
4 x 3.5"
Ignition
Electric
Governor
Electronic
Regulation
+/- 1 Hz Steady State
Exhaust
Critical Grade
Exhaust Outlet Size
3" at Muffler
Recommended Oil
SAE 10W-30
Oil Capacity
5.5 QTS
Low Oil Protection
Standard
High Coolant Temp Protection
Standard
dBA @ 7 meters (Full Load)
75
Motor Starting (Code G)
20 HP
CARB Approved
Yes
EPA Approved
Yes
CSA Approved
Yes
Fuel Consumption NG 100% Load
799 FT³/HR - 798,455 BTU/HR
Fuel Consumption LP 100% Load
9.29 GAL/HR - 850,964 BTU/HR
Inlet Pressure
4-6 oz / 7-11" water column
Inlet Fuel Size
1 1/4"
Engine Warranty
3 yrs/3500 hrs
PSS60 Battery Specifications
DC System Voltage
12V
DC Alternator
Engine Mounted
Battery Rack/Cables
Included
Battery Charger
5 Amp Included
Required Battery
Group 24 650 CC
Additional Information
Weight
2390 lbs
Dimensions
109 × 40.5 × 60 in
- Brand: Winco
- SKU: WINCO-PSS60-STANDBY
- Viewed: 19
- Availability: In Stock
$19,993.00
Tags:Winco GeneratorPSS60 Generator60kW GeneratorStandby GeneratorIndustrial GeneratorCommercial GeneratorBackup PowerHeavy Duty GeneratorWinco PSS60Power Systems

